6. At least 50% battery charged phone 7. USB debugging mode enabled on 4.4.3 firmware as we will need it so do it first then go ahead 8.Connect Your device to PC and allow the Debugging on device And don't forget to tick the remember this pc option or else you have to Flash 4.4.3 again and start from the Beginning .
Follow These 12 Steps Step1. Install flash tool in C drive . Step2. Extract downloaded rar in to C:\Flashtool\firmwares. Step3. Turn off phone and press vol - (down) key and connect phone to pc wait till pc complete to install , drivers as soon as its done disconnect your phone . Step4. Now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone. Step5. Now as soon as you get notification press vol -(down) key and connect phone and wait till flash completes. Step6. Now disconnect your phone, close flash tool. Step7. Turn on phone there wod be nothing will stuck at blank screen dont warry reonnect your phone to pc. Step8. Now open easy root tool kit,and hit install.bat root your phone if stuck at any place close window again hit install.bat, disconnect phone when you see phone is rooted. Step9.And now read this carefully your phone is rooted but to flash 4.4.3 kernal back we beed to turn off the phone as we have to connect phone in flash mode to flash ftf 4.4.3 so to turn off phone in this condition(bank screen) follow this trick press vol +(UP) and power together and wait 1st you will fell single vibret keep holding after some few sec you will fell three times vibration now release the keys as your phone is turned off. Step10. Open flash tool again hit flash button and this time select 4.4.3.ftf press ok and connect your phone when it says to connect by pressing vol - (down) key on phone. Step11. As soon as its done disconnect your phone and turn it on. Step12. Now install supersu and hit update binary
New Method Send your Whatsapp No. at eranmol@live.in to receive an activation call (You will recive a call as soon as invites are renewed) OLD METHOD This procedure consists of 4 methods for both root and non-root users.....
to use this feature both the devices have call enabled...
REQUIREMENTS :-
A rooted device
Latest whatsapp apk from
whatsapp.com/android
you have to receive a call from
someone who has the feature active ( answer the call) before following
these steps
Android 5.0.x
Method 1 :-
1.Install the latest apk .
2.Open any root explorer
(es file explorer preferred ) and navigate to /data/data/com.whatsapp/shared_prefs/com.whatsapp_preferences.xml
3Add these 2 lines
anywhere in the file but within the <map></map> and save Code:
<boolean
name="call" value="true" />
<string
name="call_allowed">all</string>
4.Then go to
Settings/Apps/Whatsapp and force stop it.
5.Open the app again and you are done.
Method 2 :- ( Require terminal emulator)
1. open terminal emulator in your android phone
2. type in the following:
HTML Code:
su
am start -n com.whatsapp/com.whatsapp.HomeActivity
3. whatsapp should now open with the calling feature enabled.
Download Fake GPS Location Spoofer Pro - Click Here
Step 2 Open app Navigate to your desired Location And Press On PLAY icon at the bottom left. Step 3 To change your Location again First Press STOP icon at the bottom left. and Navigate to your desired Location And Press On PLAY icon again to apply changes. Step 4 To stop Spoofing open app and press STOP.
every thing works fine contact me if you are having issues with smart lock trusted wifi - simply change the settings to Auto unlock/lock when wifi was conected or disconected and enjoy
Description
★ Lockdown Pro is the BEST applock, supporting more than 30 languages.
★ Lockdown Pro can lock any app, such as SMS, Gmail, Facebook, Whatsapp, SnapChat, Instagram, Viber, Line, Evernote, lock install/uninstall etc.
★ Lockdown Pro can hide pictures, videos (support .gif image).
(Turn On Unknown Sources from Settings/Security if and error occurs.)
2 Launch the app Grant Superuser Access (Root Access - click here to root ) Navigate To Framework and click on Install/Update and Reboot.
#Trick 1 Save Any Snap / Video using Keepchat
1 Download Keepchat Click Here
2 Install apk and navigate to Xposed Installer > Modules >check the keepchat module.
3 Reboot and navigate to keepchat and set your requirements .
#Trick 2 Send Any Snap / Video using Snapshare
1 Download Snapshare Click Here
2 Install apk and navigate to Xposed Installer > Modules >check the Snapshare module.
3 Reboot and navigate to Snapsharet and set your requirements .
4 Go to gallery and share any image via snapshare and enjoy.
Step 2- Open Main Storage /SD Card and locate your Extracted Files.
Step 3- Copy the folders (app,etc,framework and lib. only) by long pressing the file
Step 4- Now Go back to the Home and open System(Root)
Step 5- Press OK
Step 6- Locate and open System -->open it
Step 7- Click ON the Green LOCK icon at the top ,toward the right as shown,in the dialog box ,CHECK i understand the risk and press OK.
The lock now turnsRed
Step 8- Click on CLIPBOARD ,seclect Paste and over right
Step 9- Now change the permission of all files you copied as shown below, you can change it by long pressing the folder.(You may brick your device if it is not done properly.)
Step 10-Open the .txt file from the extracted folder and copy the contents of it starting from second line(as shown)
Step 11-Now again open system folder and select build.prop and edit it by long pressing on the file and selecting edit and then just paste the copied content at the end of thefile.
Step 12- Click on the RED lock ,it ill turn GREEN.
Requirement 1.Allow unknown sources form Settings>security>unknown sources. 2.Now go to About Phone(In settings) and Tap on Build Number 6 times until you get Developer options enabled. 3. Now Go back and search for Developer options in settings. 4.Turn on Developer options And select USB debugging. Method 1 (NEW METHOD)
Important information Please note that you may void the warranty of your phone and/or any warranty from your operator if
you unlock the boot loader. You should only unlock the boot loader of
your phone if you are an advanced user with good knowledge of the
technology and risks involved. Root Your Device Here Install CWM Here Unlock BOOTLOADER(plz try finding bootloader Unlock Procedure your self,because i have unlocked it few months ago and dont know the actual procedure ) For more information go herehttp://unlockbootloader.sonymobile.com/
First thing you need to do is check whether your device bootloader is unlockable or not, how to do that >
1) Dial *#*#7378423#*#*
2) In your device tap Service Info > Configuration > Rooting Status.
3) If you get the message Bootloader unlock allowed : YES then you can
unlock bootloader & if it says NO or if the status is missing then
you cannot continue with bellow guide to unlock sony xperia p bootloader.
1) Charge your device more than 60%.
2) Enable USB debugging on Sony Xperia P by going to Menu > Settings
> Applications > Development > USB debugging > Check the
box.
3) Another page will open automatically, check both the boxes & click I accept.
4) A new page will open, enter your name, email address & IMEI
number of your handset, then click Submit button over there. You can get
the IMEI number of your device by dialing *#06#.
5) Wait for few minute & you will receive a mail from Sony, there
you will find the Sony Xperia P boot loader unlocking KEY, save it for
latter use.
7) Download & Unzip this file, then place the unzipped file in usb_driver folder, located in the Android SDK > extras > google folder on your computer. Accept to replace the old android_winusb.inf-file with the new file. or DOWNLOAD Padnet for driversand update all possible drivers in Device Manager(in control panel ) on your pc
8) Turn off your Sony Xperia P.
9) Now enter into Fastboot mode of your Xperia P , To enter into fastboot mode >Press & hold the Volume Down Key while Connecting the USB cable with your Phone as well as with your PC.
10) On your computer, you will be asked for drivers. Point to the
usb_driver folder where you placed the android_winusb.inf-file, and
select the Android bootloader interface-file.
11) Then, go to Android SDK >> Platform tools folder. Press and
hold the SHIFT button on your keyboard, then right-click on an empty
part of the screen and select open a command prompt window here.
12) Now a black window will open, there type the bellow command & press enter.
fastboot.exe -i 0x0fce getvar version
13) Now the final part, on the same Command Prompt window type this bellow command & hit enter. (here KEY refers to that boot loader key which you got via email).
fastboot.exe -i 0x0fce oem unlock 0xKEY
14) Great you have finished the steps to unlock Sony Xperia P bootloader.
15) At the end the finished message will be displayed, Now type bellow command & hit enter to restart your cell.
Anmol Singh Mangat, I am A Mechanical Engineer ,a Blogger and a Film Director far away, from the boundaries of world. Currently holding the position of Senior Mechanical Engineer at A.L.Coldforge Pvt. Ltd.
